Polyolefin heat shrink tubing dual medium to heavy (thick) wall
3:1 to 6:1 shrink ratio for irregular shapes & sizes.

(PDF : 34kb) EDW9 & EDW10 (PDF : 34kb) both are semi-rigid medium to heavy wall XL cross linked polyolefin heat shrink tubing, coated internally with an adhesive or mastic lined. They are designed to withstand the most severe mechanical & abusive requirements for submersible, cathodic protection, pipeline systems & direct buried installations.

The broad ranges of sizes, coupled with high shrink ratio, accommodate most configurations providing extremely tough & flexible protection.

Both products are available in either : Adhesive lined Type A.

Both code types are supplied in 4 foot or 1.2m Lengths.
Supplied : With Adhesive lined (A) or Mastic lined (M).

Colour : 0, Black only. Ordering example : EDW9 229/77-0-A

We also produce a very high expansion ratio 6:1 shrink product called EDW11 (PDF : 34kb) which has an continuous operating temperature range of -55 to 105°C. This products will incorporate difficult irregular sizes far better than both EDW9 or EDW10.

EDW11 as supplied either U=Unlined or A=Adhesive lined.
Colour : 0, Black only.

The following EDW11 sizes available

19/3.2mm
33/5.5mm
44.4/8.3mm
70/11.7mm
89/17mm
120/23mm

Ordering example :
EDW11 - 33/5.5-0-A

Customers, individuals looking for small quantities should please note, that we supply to a minimum order quantity (MOQ) per code types, sizes.

/ Home / Copyright © 1997 - 2008 / Disclaimer / e&oe / Contact / Links /
corrosion protection sleeving, abrasion resistant tubing, mil-dtl-23053, polyolefin heatshrink tubing, dual wall heatshrink sleeving, medium wall polyolefin, corrosion protection, heavy wall polyolefin, polyolefin dual wall, dual wall polyolefin, low voltage cable jointing, insulating cable splices, krympslangar, protection of cable joints, mastic lined polyolefin, adesivi poliolefina, cathodic protection, glyn-wed pipe systems, gps pipe systems,